Product Family

多功能DAQ

Measurement Type

电压
相位差編碼

Form Factor

USB

Operating System / Target

Windows

RoHS Compliant

是

Isolation Type

None

模拟输入

Single-Ended Channels

16

差分通道

8

模拟输入分辨率

16 bits

*电压范围

Range

-10 V - 10 V

Accuracy

2.71 mV

Sensitivity

118 µV

Minimum Voltage Range

Range

-200 mV - 200 mV

Accuracy

0.089 mV

Sensitivity

5.2 µV

Number of Ranges

4

Simultaneous Sampling

Simultaneous Sampling

A property of a measurement system in which each input or output channel is digitized or updated at the same instant. You will need simultaneous sampling for applications where the time relationship between inputs is important, such as phase analysis of AC signals.

Because channel-dedicated analog-to-digital converters (ADCs) are used to sample data simultaneously between inputs, the maximum sample rate is applicable to each channel and is not divided by the total number of channels. Devices that don’t have simultaneous sampling capabilities use multiplexing to connect each channel to its ADC.

Interval scanning is a low-cost option to simulate simultaneous sampling for low-frequency signals such as temperature or pressure. This method scans the input channels at one interval and uses a second interval to determine the time before repeating the scan. The input channels are scanned within microseconds, creating the effect of simultaneously sampling the input channels.

No

板载内存

4095 樣本

模拟输出

Number of Channels

2

Resolution

16 bits

Maximum Voltage Range

Range

-10 V - 10 V

Accuracy

3.512 mV

Minimum Voltage Range

Range

-10 V - 10 V

Accuracy

3.512 mV

Update Rate

250 kS / s

Current Drive Single

2 mA

Current Drive All

4 mA

Digital I / O

Bidirectional Channels

32

Input-Only Channels

0

Output-Only Channels

0

Timing

軟體

Logic Levels

TTL

Programmable Input Filters

否

Supports Programmable Power-Up States?

是

Digital Input

Input Type

汲極
源电流

Maximum Voltage Range

0 V - 5.25 V

Digital Output

Output Type

Current Flow

A sinking device provides a path for the current to ground and is not responsible for powering the device. Terms used to describe sinking devices include NPN, Open Collector, Normally High, and IEC Negative Logic.

A sourcing device provides the power or a positive potential. Sourcing devices ''push'' the current through the load. Terms used to describe sourcing devices include PNP, Open Emitter, Normally Low, and IEC Positive Logic.

Relays are ified by their number of poles and number of throws. The pole of a relay is the terminal common to every path. Each position that the pole can connect to is called a throw. A relay can be made of n poles and m throws. For example, a single-pole single-throw relay (SPST) has one pole and one throw.

·  Form A relays are SPST with a default state of normally open.=

·  Form B relays are SPST with a default state of normally closed.

·  Form C relays are SPDT and break the connection with one throw before making contact with the other (break-before-make)..

汲極
源电流

Current Drive Single

16 mA

Current Drive All

50 mA

Maximum Voltage Range

0 V - 3.8 V

Counters / Timers

Watchdog Timer

Digital I/O Watchdogs

NI digital I/O watchdogs are an innovative technology that provides protection against a wide variety of fault conditions:

·Computer crash - total OS crash

·Application crash - software application ceases to respond

·Driver crash - device driver ceases to respond

·PCI bus failure - communications cease to respond

With watchdogs, the digital outputs go to a safe state when a fault condition is detected and the watchdog timer expires for safe recovery. Watchdogs are important whenever the module is connected to actuators such as pumps, valves, motors, and relays. The digital I/O module monitors the software application and, if it fails to respond within the time limit, automatically sets the output lines to a user-defined safe state. The module remains in the watchdog state until the watchdog timer is disarmed by the application and new I/O values are written, the device is reset, or the computer is restarted.

否

Counters

2

Buffered Operations

是

Debouncing / Glitch Removal

是

Max Source Frequency

80 MHz

Pulse Generation

是

Size

32 bits

Time Stability

50 ppm

Logic Levels

TTL

Timing / Triggering / Synchronization

Triggering

數位

Physical Specifications

Length

16.9 cm

Width

9.4 cm

Height

3.1 cm

I / O Connector

螺丝端子

USB Power

总线供电