- ·2024晋中地磅衡器维修2024晋中...
- ·2024天长数字地磅售后维修2024...
- ·2024蓬莱地磅修理2024蓬莱地磅...
- ·2024余姚地磅秤拆装维修2024余...
- ·2024焦作地磅维修2024焦作地磅...
- ·2024南昌市地磅检修2024南昌市...
- ·2024商洛地磅秤拆装维修2024商...
- ·2024鹿邑地磅衡配件维修2024鹿...
- ·2024当阳地磅衡器维修2024当阳...
- ·2024扬中地磅维修2024扬中地磅...
- ·2024南县地磅秤拆装维修2024南...
- ·2024迪庆地磅衡器2024迪庆地磅...
- ·2024雅安地磅故障维修2024雅安...
- ·2024枣阳地磅衡器维修2024枣阳...
- ·2024睢县地磅维修2024睢县地磅...
GSM-20H10操作视频
GSM-20H10数字源表|启航检测科技（上海）有限公司优惠价供应台湾固纬INSTEK/GSM-20H10数字源表
启航科技提供GSM-20H10销售、GSM-20H10维修、GSM-20H10租赁、GSM-20H10中文说明书、GSM-20H10操作视频、GSM-20H10技术培训、GSM-20H10计量证书、GSM-20H10校准证书等等
*输出 ±210V/ ±1.05A/ 22W4.3” TFT LCD, 数字键盘
四象限工作
I/V曲线、I/t曲线、V/t曲线
电压源、电流源、数字电表功能
0.012%基本测量精度, 6½数字电表测试, 1μV/10pA/10μΩ分辨率
内置4种序列输出模式(Stair、Log、SRC-MEM、Custom), *多2500点
SDM(Source Delay Measure)
2/4/6线电阻测试远程V-source和Measure Sensing
内置Pass/Fail功能
接口: RS-232C, USBTMC, LAN, GPIB(选配)
采样的速度上，GSM-20H10支持*50k点/每秒的采样速度，可更*地针对待测物的特性进行分析。透过4.3寸的大尺寸屏幕，更可以将所有的量测设定、参数与结果都完整的显示在屏幕上。支持SDM (Source Delay Measure)功能，可设定信号产生变化时，延后进行采样，避免稳定前的信号被撷取进去造成误判。内建四种程序输出模式(Linear, Log, SRC-MEM, Custom)，*多可支持2500个点的程序变化输出。
在设备保护上，GSM-20H10提供了OVP/OTP保护模式；在OVP的设计上，使用者可自定义OVP的范围，而OTP的保护则可有效防止在测试过程中因温度偏移造成的错误。在接口部分，本产品支持标准的SCPI指令，提供RS-232 , USBTMC , LAN, GPIB (选配)等接口，满足用户不同的接口需求。
GSM-20H10(带GPIB) 高精度源表
GSM-20H10 高精度源表
标配
使用手册CD*1
电源线*1
测试线GTL-207A*1
GTL-203A*1
GTL-204A*1
选配
SM-03, GPIB Card
选购配件
|
SM-01 |
Digital I/O Adapter, Convert DB15 to DB9 + 8-pin micro-DIN |
|
SM-02 |
Digital I/O Adapter, Convert DB15 to DB37 + 8-pin micro-DIN |
|
GTL-246 |
USB Cable (USB 2.0 A-B Type, approx. 1200mm) |
|
GTL-258 |
GPIB Cable (25 pin Micro-D Connector) |
产品规格
|
Maximum Range |
Voltage |
±210V |
||||||||
|
Current |
±1.05A |
|||||||||
|
Power |
22W |
|||||||||
|
Voltage Resolution |
1µV |
|||||||||
|
Current Resolution |
10pA |
|||||||||
|
Source |
DC Voltage |
Output Voltage |
±21V/ ±1.05A, ±210V/±105 mA |
|||||||
|
Current Limit |
Min. 0.1% of range |
|||||||||
|
Programming Resolution |
1µV, ±200.000mV range |
|||||||||
|
10µV, ±2.00000V range |
||||||||||
|
100µV, ±20.0000V range |
||||||||||
|
1mV, ±200.000V range |
||||||||||
|
Programming Accuracy 1 |
±(0.02%+600µV), ±200.000mV range |
|||||||||
|
±(0.02%+600µV), ±2.00000V range |
||||||||||
|
±(0.02%+2.4mV), ±20.0000V range |
||||||||||
|
±(0.02%+24mV), ±200.000V range |
||||||||||
|
Load Regulation |
0.01% of range + 100µV |
|||||||||
|
Line Regulation |
0.01% of range |
|||||||||
|
Overshoot |
<0.1% typical (full scale step, resistive load,10mA range) |
|||||||||
|
Recovery Time (1000%Load Change) |
<250µs (within 0.1% plus load regulation errors, 1A and 100mA compliance.) |
|||||||||
|
Ripple and Noise |
4mV rms(20Hz~ 1MHz) 10mVpp(20Hz~ 1MHz) |
|||||||||
|
Temperature Coefficient |
±(0.15 × accuracy specification)/°C |
|||||||||
|
DC Current |
Output Current |
±1.05A /±21V, ±105 mA /±210V |
||||||||
|
Voltage Limit |
Min. 0.1% of range |
|||||||||
|
Programmed Source Resolution |
10pA, ±1.00000µA range |
|||||||||
|
100pA, ±10.0000µA range |
||||||||||
|
1nA, ±100.000µA range |
||||||||||
|
10nA, ±1.00000mA range |
||||||||||
|
100nA, ±10.00000mA range |
||||||||||
|
1µA, ±100.000mA range |
||||||||||
|
10µA, ±1.00000A range |
||||||||||
|
Programmed Source Accuracy 1 |
±(0.035%+600pA), ±1.00000µA range |
|||||||||
|
±(0.033%+2nA), ±10.0000µA range |
||||||||||
|
±(0.031%+20nA), ±100.000µA range |
||||||||||
|
±(0.034%+200nA), ±1.00000mA range |
||||||||||
|
±(0.045%+2µA), ±10.00000mA range |
||||||||||
|
±(0.066%+20µA), ±100.000mA range |
||||||||||
|
±(0.27%+900µA), ±1.00000A range |
||||||||||
|
Load Regulation |
0 0.01% of range + 100pA |
|||||||||
|
Line Regulation |
0.01% of range |
|||||||||
|
Overshoot |
<0.1% typical (1mA step, RL = 10kΩ, 20V range). |
|||||||||
|
Temperature Coefficient |
±(0.15 × accuracy specification)/°C |
|||||||||
|
General |
Output Settling Time2 |
100µs typical Time |
||||||||
|
Output Rise Time (±30%) |
300µs, 200V range, 100mA compliance. |
|||||||||
|
150V/µs, 20V range, 100mA compliance. |
||||||||||
|
DC Floating Voltage |
Output can be floated up to ±250VDC |
|||||||||
|
Remote Sense |
Up to 1V drop per load lead. |
|||||||||
|
Compliance Accuracy |
Add 0.3% of range and ±0.02% of reading to |
|||||||||
|
Range Change Overshoot 3 |
Adjacent range changes between 200mV, 2V and 20V ranges, 100mV typical. |
|||||||||
|
Minimum Compliance Value |
0.1% of range |
|||||||||
|
Command Processing Time 4 |
Autorange On:10ms.Autorange Off:7ms. |
|||||||||
|
Measurement |
Voltage |
Input Resistance |
>10 GΩ |
|||||||
|
Measurement Resolution |
1µV, ±200.000mV range |
|||||||||
|
10µV, ±2.00000V range |
||||||||||
|
100µV, ±20.0000V range |
||||||||||
|
1mV, ±200.000V range |
||||||||||
|
Measurement Accuracy |
±(0.012%+300µV), ±200.000mV range |
|||||||||
|
±(0.012%+300µV), ±2.00000V range |
||||||||||
|
±(0.015%+1.5mV), ±20.0000V range |
||||||||||
|
±(0.015%+10mV), ±200.000V range |
||||||||||
|
Temperature Coefficient |
±(0.15 × accuracy specification)/°C |
|||||||||
|
Current |
Voltage Burden (4-wire mode) |
< 1mV |
||||||||
|
Programmed Source Resolution |
10pA, ±1.00000µA range |
|||||||||
|
100pA, ±10.0000µA range |
||||||||||
|
1nA, ±100.000µA range |
||||||||||
|
10nA, ±1.00000mA range |
||||||||||
|
100nA, ±10.00000mA range |
||||||||||
|
1µA, ±100.000mA range |
||||||||||
|
10µA, ±1.00000A range |
||||||||||
|
Programmed Source Accuracy1 |
±(0.029%+300pA)), ±1.00000µA range |
|||||||||
|
±(0.027%+700pA), ±10.0000µA range |
||||||||||
|
±(0.025%+6nA), ±100.000uA range |
||||||||||
|
±(0.027%+60nA), ±1.00000mA range |
||||||||||
|
±(0.035%+600nA), ±10.00000mA range |
||||||||||
|
±(0.055%+6µA), ±100.000mA range |
||||||||||
|
±(0.22%+570µA), ±1.00000A range |
||||||||||
|
Temperature Coefficient |
±(0.1 × accuracy specification) / °C |
|||||||||
|
Resistance |
Range |
Resolution |
Test current |
Accuracy |
||||||
|
<2.00000Ω |
--- |
--- |
Source IACC+Meas.VACC |
|||||||
|
2.00000Ω |
10µΩ |
--- |
Source IACC+Meas.VACC |
|||||||
|
20.0000Ω |
100µΩ |
100mA |
±(0.1%+0.003 Ω), Normal |
|||||||
|
±(0.07%+0.001 Ω), Enhanced |
||||||||||
|
200.000Ω |
1mΩ |
10mA |
±(0.08%+0.03 Ω), Normal |
|||||||
|
±(0.05%+0.01 Ω), Enhanced |
||||||||||
|
2.00000kΩ |
10mΩ |
1mA |
±(0.07%+0.3 Ω), Normal |
|||||||
|
±(0.05%+0.1 Ω), Enhanced |
||||||||||
|
20.0000kΩ |
100mΩ |
100µA |
±(0.06%+3 Ω), Normal |
|||||||
|
±(0.04%+1 Ω), Enhanced |
||||||||||
|
200.000kΩ |
1Ω |
10µA |
±(0.07%+30 Ω), Normal |
|||||||
|
±(0.05%+10 Ω), Enhanced |
||||||||||
|
2.00000MΩ |
10Ω |
5µA |
±(0.11%+300 Ω), Normal |
|||||||
|
±(0.05%+100 Ω), Enhanced |
||||||||||
|
20.0000MΩ |
100Ω |
0.5µA |
±(0.11%+1k Ω), Normal |
|||||||
|
±(0.05%+500 Ω), Enhanced |
||||||||||
|
200.000MΩ |
1kΩ |
100nA |
±(0.66%+10k Ω), Normal |
|||||||
|
±(0.35%+5k Ω), Enhanced |
||||||||||
|
>200.000M Ω |
--- |
--- |
Source IACC+Meas.VACC |
|||||||
|
Temperature Coefficient |
±(0.15 × accuracy specification)/°C |
|||||||||
|
Source I mode, Manual OHMS |
Total uncertainty = I source accuracy + V measure accuracy (4-wire remote sense). |
|||||||||
|
Source V mode, Manual OHMS |
Total uncertainty = V source accuracy + I measure accuracy (4-wire remote sense). |
|||||||||
|
6-wire OHMS mode |
Available using active ohms guard and guard sense. Max. Guard Output Current: 50mA (except 1A range). Accuracy is load dependent. |
|||||||||
|
Guard Output Impedance |
<0.1Ω in ohms mode |
|||||||||
|
System Speed |
Maximum Range Change Rate |
75/second |
||||||||
|
Maximum Measure Auto Range Time |
40ms (fixed source) 6 |
|||||||||
|
Sequence reading rates7 (rdg./second) for 60Hz (50Hz) |
Speed |
NPLC/ Trig Origin |
Measure |
Source-Measure 9 |
||||||
|
TO MEM. |
TO GPIB |
TO MEM. |
TO GPIB |
|||||||
|
Fast |
0.01 / internal |
2081 (2030) |
1198 (1210) |
1551 (1515) |
1000 (900) |
|||||
|
488.2 |
0.01 / external |
1239 (1200) |
1079 (1050) |
1018 (990) |
916 (835) |
|||||
|
Medium |
0.1 / internal |
510 (433) |
509 (433) |
470 (405) |
470 (410) |
|||||
|
488.2 |
0.1 / external |
438 (380) |
438 (380) |
409 (360) |
409 (365) |
|||||
|
Normal |
1 / internal |
59 (49) |
59 (49) |
58 (48) |
58 (48) |
|||||
|
488.2 |
1 / external |
57 (48) |
57 (48) |
57 (48) |
57 (47) |
|||||
|
Speed |
NPLC/ Trig Origin |
Source-Measure Pass/Fail test 8,9 |
Measure Memory 9 |
|||||||
|
TO MEM. |
TO GPIB |
TO MEM. |
TO GPIB |
|||||||
|
Fast |
0.01 / internal |
902 (900) |
809 (840) |
165 (162) |
164 (162) |
|||||
|
488.2 |
0.01 / external |
830 (830) |
756 (780) |
163 (160) |
162 (160) |
|||||
|
Medium |
0.1 / internal |
389 (343) |
388 (343) |
133 (126) |
132 (126) |
|||||
|
488.2 |
0.1 / external |
374 (333) |
374 (333) |
131 (125) |
131 (125) |
|||||
|
Normal |
1 / internal |
56 (47) |
56 (47) |
44 (38) |
44 (38) |
|||||
|
488.2 |
1 / external |
56 (47) |
56 (47) |
44 (38) |
44 (38) |
|||||
|
Single Reading Operation Rates (rdg./second) for 60Hz (50Hz) |
Speed |
NPLC/ Trig Origin |
Measure |
Source-Measure 9 |
Source-Measure Pass/Fail test 8,9 |
|||||
|
TO GPIB |
TO GPIB |
TO GPIB |
||||||||
|
Fast(488.2) |
0.01 / internal |
256 (256) |
79 (83) |
79 (83) |
||||||
|
Medium(488.2) |
0.1 / internal |
167 (166) |
72 (70) |
69 (70) |
||||||
|
Normal(488.2) |
1 / internal |
49 (42) |
34 (31) |
35 (30) |
||||||
|
Component Interface Handler Time for 60Hz (50Hz):8, 10 |
Speed |
NPLC/ Trig Origin |
Measure |
Source Pass/Fail test |
Source-Measure Pass/Fail test 9,11 |
|||||
|
TO GPIB |
TO GPIB |
TO GPIB |
||||||||
|
Fast |
0.01 / internal |
1.04 ms (1.08 ms) |
0.5 ms (0.5 ms) |
4.82 ms (5.3 ms) |
||||||
|
Medium |
0.1 / internal |
2.55 ms (2.9 ms) |
0.5 ms (0.5 ms) |
6.27 ms (7.1 ms) |
||||||
|
Normal |
1 / internal |
17.53 ms (20.9 ms) |
0.5 ms (0.5 ms) |
21.31 ms (25.0 ms) |
||||||
|
System General |
Load Impedance |
Stable into 20,000pF typical |
||||||||
|
Differential mode Voltage |
250 VPk |
|||||||||
|
Common mode Voltage |
250 VDC |
|||||||||
|
Common mode Isolation |
>10GΩ, <1000pF |
|||||||||
|
Over Range |
105% of range, source and measure. |
|||||||||
|
Max. Voltage drop |
5V |
|||||||||
|
Max. Sense lead Resistance |
1MΩ |
|||||||||
|
Sense input Impedance |
>100G Ω |
|||||||||
|
Guard offset Voltage |
<150µV, typical |
|||||||||
|
Source output modes |
Fixed DC level, Memory List (mixed function), Stair (linear and log) |
|||||||||
|
Source memory list |
100 points max. |
|||||||||
|
Memory buffer |
5,000 readings @ 5 digits (two 2,500 point buffers). Includes selected measured value(s) and time stamp. Lithium battery backup(3 yr+ battery life). |
|||||||||
|
Programmability |
IEEE-488.2 (SCPI) |
|||||||||
|
5 user-definable power-up states plus factory default and *RST. |
||||||||||
|
Digital I/O Connector |
Active low input. |
|||||||||
|
Start of test, end of test, 3 category bits. |
||||||||||
|
+5V@ 300mA supply. |
||||||||||
|
1 trigger input, 4 TTL/Relay Drive outputs (33V @ 500mA, diode) |
||||||||||
|
Remote Interface |
USB/GPIB/LAN/RS-232 |
|||||||||
|
Insulation |
Chassis and Terminal |
20MΩ or above (DC 500V) |
||||||||
|
Chassis and AC cord |
30MΩ or above (DC 500V) |
|||||||||
|
Operation Environment |
Indoor use, Altitude: ≤ 2000m Ambient temperature: 0 ~ 40°C Relative humidity: ≤ 80% |
|||||||||
|
Installation category: II, Pollution degree: 2 |
||||||||||
|
Storage Environment |
Temperature: -20˚C ~ 70˚C |
|||||||||
|
Humidity: < 80% |
||||||||||
|
Input Power |
100-240VAC, 50-60Hz |
|||||||||
|
Power Consumption |
80W |
|||||||||
|
Accessories |
CD User manual x1, Quick Start manual x1 |
|||||||||
|
Test lead GTL-207A x 1, GTL-108A x 1, ALLIGATOR CLIP x 2 |
||||||||||
|
Dimensions |
214 (W) x 86 (H) x 356.5 (D) mm |
|||||||||
|
Weight |
Approx. 4.8kg |
|||||||||
