Thermocoax公司标准热电偶/传感器

德国THERMOCOAX加热元件、温度传感器及电缆等THERMOCOAX是在全球提供加热解决方案的知识和温度测量的公司。产品包括：加热元件、温度传感器、防爆温度传感器和加热器、绝缘信号传输电缆等。广泛应用于核...

THERMOCOAX Heating elements

Resistance heating is one of the first applications of electricity..

In the course of a century, thousands of heating problems have been solved ranging from megawatts down to a few watts, or less.

The fundamentals are always the same, the requirements and solutions widely different.

Between a large furnace constructed as an individual unit and a domestic heater produced in large quantities, there exist a number of cases where no “ready-made” solution is available.

For such cases, THERMOCOAX often presents a suitable answer to:

• Heating from the cryogenic temperatures up to
  >1000°C.

• Heat dissipation either very low or very high power (from few watts to several tens of kilowatts).

• For use in air, under vacuum or high pressure and in any corrosive environment compatible with the sheath material.

• In applications requiring high reliability components.

Easy fitting

Electrical screening

• THERMOCOAX heaters can be attached directly to metal parts

Tight bending radius

• Only 3 times the outer diameter

Small dimensions

• The heat can be generated exactly where it is required thus power losses are reduced as well as power consumption

Excellent heat exchange

• Thermocoax公司标准热电偶/传感器

• The heater can be brazed onto any metal piece

法国热缆公司（Thermocoax）公司标准热电偶产品范围：-200℃到1200℃，这些热电偶不使用贵金属•；K型，-Alumel®；(镍铬-镍铝)，温度范围-200℃至1250℃，灵敏度41μV/℃，常用的•；J型，Iron-Constantan®；(铁-铜镍)，温度范围-40℃至750℃，灵敏度55μV/℃•；E型，C h romel®；-Constantan?(镍铬-铜镍)，温度范围-200℃至950℃，灵敏度68μV/℃,非磁性•；N型，Nicrosil®；-Nisil®；(镍铬硅-镍硅)，空气中温度范围至1200℃，真空或控制气氛中达1300℃，灵敏度在900℃时为39μV/℃，与铂基的热电偶相比有非常好的稳定性。•；T型，Copper-Constantan®；(铜-铜镍)，温度范围-200℃至350℃，已不常用

0℃到1600℃，铂铑热电偶•；S型，Platinum 10％ Rhodium-Platinum (铂10％铑-铂)，常用于氧化气氛中，温度范围达1600℃，灵敏度6-12μV/℃•；R型，Platinum 13％ Rhodium-Platinum (铂13％铑-铂)，与S型类似，灵敏度6-14μV/℃•；B型，Platinum 30％ Rhodium-Platinum 6％ Rhodium (铂30％铑-铂6％铑)，温度范围达1700℃，非常稳定，但灵敏度低，特别是在低温范围时，在室温时就很微小了。尽管其高成本和低热电功率，B型热电偶一直是高温测量的基础。
0℃到2300℃，钨铼热电偶•；C型硬性或柔性，Tungsten-Rhenium 5％Re- Tungsten-Rhenium 26％Re，用于极高温度的测量，可达2300℃，用于还原中和气氛中，合金的熔点非常高，蒸汽压力很低，但没有延展性。柔性的热电偶可测温度达1800℃
部分产品型号：
1AcAc10A1 、1AcAc1016 、1AcAc1031.7A1 、1ZsAc10 、1II30AI 、2ZsZsAc20I 、2III10AI 、2III20AI 、4NAc20 、1AcAc20 、1ZsFCAc60 、TCDEEx 、TCMFFEEx

 Thermocoax公司标准热电偶/传感器