磁力搅拌器参数
工作电源 100-240VAC适配器,输出18VAC/1A
功率消耗 大24VA
搅拌棒速度 程序控制,180-450转/min
保存温度 -25~+65℃
工作温度 +5~+40℃
尺寸重量 IS 6:265×181×67mm, 1.6kg
IS 12:350×266×67mm, 3.2kg
标准配置
208211 OxiTop IS 12, 12个BOD测量单元,含12个OxiTop测量头(6黄6绿), 12个棕色510ml测量瓶及橡皮筒,12个搅拌棒及1个取棒杆,IS12搅拌器1个,100-240VAC适配器, CO2吸收剂50g*2,硝化抑制剂25ml,164/432ml溢流瓶各1,记录纸1本,使用手册
The determination of BOD is one of the most important parameters in water resource management. BOD is not only an important index for evaluating water quality and wastewater treatment, but also an important basis for planning and designing wastewater treatment equipment. Respiratory method(pressure-gauge method) is a simple and reliable method for measuring BODs. OxiTop is a BOD measurement system d on this principle. The microorganisms in the water sample consume oxygen, the resulting CO2 is absorbed by NaOH, and negative pressure is formed in the closed measurement bottle. OxiTop directly reads the mg/l BOD measurement by measuring the change in pressure. value. :: Breathing method(pressure gauge method) BOD5 * OxiTop IS 6 can measure up to 6 samples at the same time * OxiTop IS 12 can measure up to 12 samples at the same time * Using different sample sizes with a maximum range of up to 4,000 mg / L * OxiTop measurement head divided into yellow/green, used to distinguish water in/out of water :: The OxiTop measuring head has an automatic temperature function, automatically delaying the measurement for 1-3 hours when the sample does not reach a constant temperature until the temperature is stable :: Automatic storage of 5 measurements, 1 per day, without staff supervision :: Survey values are available at any time during or after the five-day survey :: Ultra long battery life, approximately once every 3 years OxiTop measurement header parameter Measurement principle breathing method(pressure meter method) Figure 2 7 LED, 10mm Measurement parameter BODn Measurement range 0 to 40 mg/l. .. .. Maximum 4,000 mg/l Measurement temperature 20 °C ± 1 °C Sample temperature 15-20 °C Lithium battery(260mAh), 2 CR 2430(3V) Battery life approximately 3 years Storage temperature -25 ~ +65 °C Operating temperature 20 °C ± 1 °C Size weight 69mm X diameter 70mm, CA. 85g Magnetic agitator parameters Working power 100-240VAC adapter, output 18VAC/1A Power consumption maximum 24VA Mixing rod speed program control, 180-450 rpm / min Storage temperature -25 ~ +65 °C Operating temperature +5 ~ +40 °C Size weight IS 6:265 × 181 × 67mm, 1.6 kg IS 12:350 × 266 × 67mm, 3.2 kg Standard Configuration 208211 OxiTop IS 12, 12 BOD measurement units, including 12 OxiTop measurement heads(6 yellow and 6 green), 12 brown 510ml measurement bottles and rubber tubes, 12 mixing rods and 1 grab rod, IS12 mixer 1, 100-240VAC adapter, CO2 absorbent 50G * 2, nitrification inhibitors 25ml, 164/432ml overflow bottle 1 each, record er 1, manual for use
德国WTW BOD5 Oxitop IS12生化需氧量BOD测定仪
生化需氧量BOD的测定是水资源管理中重要的参数,BOD既是评价水质及废水处理效果的重要指标,也是规划设计废水处理设备的重要依据。
呼吸法(压力计法)是测量BOD的一种简单可靠的方法。OxiTop即是基于这一原理的BOD测量系统,水样中的微生物消耗氧气,产生的CO2被NaOH吸收,在密闭的测量瓶中形成负压, OxiTop通过测量压力的变化直接读出mg/l BOD测量值。shanlimei
* 呼吸法(压力计法)测量BOD5
* OxiTop IS 6 可同时测量多6个样品
* OxiTop IS 12可同时测量多12个样品
* 采用不同的样品量,大测量范围可达4,000mg/L
* OxiTop测量头分黄/绿两色,用于区分入水/出水
* OxiTop测量头具有自动温度功能,当样品未达到恒定温度时自动延迟测量1-3小时,直到温度稳定
* 自动存储5个测量值,每天1个,无需人员看管
* 在5天测量期间或测量结束后,可随时查看测量值
* 长电池寿命,约3年更换一次
OxiTop测量头参数
测量原理 呼吸法(压力计法)
数字显示 2位7段LED,10mm
测量参数 BODn
测量范围 0~40mg/l...大4,000mg/l
测量温度 20℃±1℃
样品温度 15~20℃
工作电源 锂电池(260mAh), 2个CR2430(3V)
电池寿命 约3年
保存温度 -25~+65℃
工作温度 20℃±1℃
尺寸重量 69mm×直径70mm, 约85g
磁力搅拌器参数
工作电源 100-240VAC适配器,输出18VAC/1A
功率消耗 大24VA
搅拌棒速度 程序控制,180-450转/min
保存温度 -25~+65℃
工作温度 +5~+40℃
尺寸重量 IS 6:265×181×67mm, 1.6kg
IS 12:350×266×67mm, 3.2kg
标准配置
The determination of BOD is one of the most important parameters in water resource management. BOD is not only an important index for evaluating water quality and wastewater treatment, but also an important basis for planning and designing wastewater treatment equipment.208211 OxiTop IS 12, 12个BOD测量单元,含12个OxiTop测量头(6黄6绿), 12个棕色510ml测量瓶及橡皮筒,12个搅拌棒及1个取棒杆,IS12搅拌器1个,100-240VAC适配器, CO2吸收剂50g*2,硝化抑制剂25ml,164/432ml溢流瓶各1,记录纸1本,使用手册
Respiratory method(pressure-gauge method) is a simple and reliable method for measuring BODs. OxiTop is a BOD measurement system
:: Breathing method(pressure gauge method) BOD5
* OxiTop IS 6 can measure up to 6 samples at the same time
* OxiTop IS 12 can measure up to 12 samples at the same time
* Using different sample sizes with a maximum range of up to 4,000 mg / L
* OxiTop measurement head divided into yellow/green, used to distinguish water in/out of water
:: The OxiTop measuring head has an automatic temperature function, automatically delaying the measurement for 1-3 hours when the sample does not reach a constant temperature until the temperature is stable
:: Automatic storage of 5 measurements, 1 per day, without staff supervision
:: Survey values are available at any time during or after the five-day survey
:: Ultra long battery life, approximately once every 3 years
OxiTop measurement header parameter
Measurement principle breathing method(pressure meter method)
Figure 2 7 LED, 10mm
Measurement parameter BODn
Measurement range 0 to 40 mg/l. .. .. Maximum 4,000 mg/l
Measurement temperature 20 °C ± 1 °C
Sample temperature 15-20 °C
Lithium battery(260mAh), 2 CR 2430(3V)
Battery life approximately 3 years
Storage temperature -25 ~ +65 °C
Operating temperature 20 °C ± 1 °C
Size weight 69mm X diameter 70mm, CA. 85g
Magnetic agitator parameters
Working power 100-240VAC adapter, output 18VAC/1A
Power consumption maximum 24VA
Mixing rod speed program control, 180-450 rpm / min
Storage temperature -25 ~ +65 °C
Operating temperature +5 ~ +40 °C
Size weight IS 6:265 × 181 × 67mm, 1.6 kg
IS 12:350 × 266 × 67mm, 3.2 kg
Standard Configuration
208211 OxiTop IS 12, 12 BOD measurement units, including 12 OxiTop measurement heads(6 yellow and 6 green), 12 brown 510ml measurement bottles and rubber tubes, 12 mixing rods and 1 grab rod, IS12 mixer 1, 100-240VAC adapter, CO2 absorbent 50G * 2, nitrification inhibitors 25ml, 164/432ml overflow bottle 1 each, record er 1, manual for use