推荐资料
更多
- ·襄阳宜城计量器具仪器计量校准检测机构...
- ·襄阳樊城区计量器具机构一站式服务...
- ·十堰郧西县时间频率计量检测获*CNA...
- ·恩施巴东县时间频率计量检测机构一...
- ·荆门京山县仪器计量检测校验校准机构2...
- ·宜昌五峰县洁净室检测/机构一站式...
- ·恩施宣恩县洁净室检测/华品计量校准能...
- ·荆州洪湖计量检测仪器计量校准检测机构...
- ·荆州江陵县电子天平计量校准第三方机构...
- ·孝感云梦县流量计计量检测 仪器计量校...
- ·宜昌长阳县流量计计量检测 第三方检测...
- ·黄冈黄梅县计量检测出具计量校准检测证...
- ·孝感汉川计量器具仪器计量校准检测机构...
- ·襄阳保康县流量计计量检测 出具计量校...
- ·黄冈罗田县计量检测计量校准第三方机构...
基于测温偏差机理的温度传感器结构优化设计
2024/09/27 08:03:04
针对某航空发动机上选用的滑油温度传感器响应速度慢、稳态测温偏差大的问题,以测温偏差的产生机理为导入,通过对测温偏差和时间常数计算公式的推导,明确稳态和动态测温偏差共同的影响因素,并以此为基础,结合滑油温度传感器在发动机上的工作环境和其自身的结构尺寸限制,提出一种增加测温端长径比、提高表面传热系数的传感器测温端结构优化措施。改进后的滑油温度传感器随发动机开展整机试验验证,试验结果表明,改进措施合理有效,改进后的传感器动态响应速度可提升至原传感器的6倍,稳态测温偏差优于1%,能够满足发动机的使用需求。
For the problem of slow response speed and large deviation of steady-state temperature measurement of the lubricating oil temperature sensor selected on a certain type of aeroengine,the generation mechanism of temperature measurement deviation is taken as the import.Through the derivation of the calculation formula of temperature measurement deviation and time constant,the common influence factors of steady-state and dynamic temperature measurement deviation are clarified,and on this basis,combined with the working environment of the lubricating oil temperature sensor on the engine and its own structural size limitations,a structural optimization measure which increasing the length ratio of the temperature measurement end and improving the surface heat transfer coefficient is proposed.The improved lubricating oil temperature sensor follows the engine to carry out the whole machine test and verification,and the test results show that the improvement measures are reasonable and effective,and the improved sensor dynamic response speed can be increased to 6 times that of the original sensor,and the steady-state temperature measurement deviation is better than 1%,which can meet the use demand of the engine.